Plug-and-play wiring kits for Triple-R Lights' High Performance LED lights. Each kit is quick, easy and reliable to install with Superseal connections and no configuration required. The light harness kits include a 12V relay in a waterproof housing, fuse, battery terminal and 1.2m lamp cable, and let you run your Triple-R lights in parallel with your vehicle's standard lighting (DOT/SAE approved products only) and/or from an independent on/off switch mounted inside the vehicle. Choose the harness that matches your lights below.

Single Light Harness Standard (2-Pin Superseal)

• 1.2m cable length
• Includes 12V relay and 20 amp fuse
• 2-pin Superseal connections
• Includes optional on/off switch for independent operation of high beam
• Braided cable sections for added protection in engine bay
• Compatible with: LR-750 Elite, LR-850 Elite, LR-1000 Elite, Linear-6 Elite, Linear-24 Elite, Linear-36, Linear-42, Linear-48, Sentinel 7", Sentinel 9" Elite, Glide

Dual Light Harness Standard (2-Pin Superseal)

• 1.2m cable lengths
• Includes 12V relay and 35 amp fuse
• 2-pin Superseal connections
• Includes optional on/off switch for independent operation
• Braided cable sections for added protection in engine bay
• Compatible with: LR-750 Elite, LR-850 Elite, LR-1000 Elite, Linear-6 Elite, Linear-36, Linear-42, Linear-48
• Not suitable for two Sentinel 9" Elite lights. Use the Dual Light Harness Mid Power or two Single Light Harnesses.

Single Light Harness Elite (3-Pin Superseal)

• 1.2m cable length
• Includes 12V relay and 20 amp fuse
• 3-pin Superseal connections
• Includes optional on/off switch for independent operation of high beam
• Braided cable sections for added protection in engine bay
• Compatible with: LR-750, LR-850, LR-1000, LR-1250, Linear-12 Elite (with DRL), Linear-18 Elite (with DRL), Sentinel 9" (with Backlight), Glide (with Backlight), Air-90

Dual Light Harness Elite (3-Pin Superseal)

• 1.2m cable lengths
• Includes 12V relay and 30 amp fuse
• 3-pin Superseal connections
• Includes optional on/off switch for independent operation of high beam
• Braided cable sections for added protection in engine bay
• Compatible with: LR-750, LR-850, LR-1000, Linear-12 Elite (with DRL), Sentinel 7" Elite, Sentinel 9", Air-90
• Not suitable for two LR-1250 (with Backlight) or two Linear-18 Elite (with DRL). Use the Dual Light Harness Mid Power.

Dual Light Harness Mid Power (3-Pin Superseal)

• 1.2m cable lengths
• Includes 12V relay and 40 amp fuse
• Relay holder approved to IP53 when mounted in a vertical (upright) orientation
• 3-pin Superseal connections
• Includes optional on/off switch for independent operation of high beam
• Braided cable sections for added protection in engine bay
• Compatible with: 2x Sentinel 9" Elite, 2x Linear-18 Elite (with DRL), 2x LR-1250 (with Backlight)

Canny Harness (CANNY Interface - Direct Connect)

CANNY is a CAN interface that enables auxiliary light installation on selected vehicles that use CAN communication, where standard 12V lighting signals aren't accessible. The system pairs a dongle and wiring loom with the CANNY.LZR app, which provides vehicle-specific install instructions and over-the-air Bluetooth updates.

• IP68 waterproof dongle with Molex connector
• Suitable for engine-bay or in-cab mounting
• Connects directly to vehicle CAN wires (CAN Hi / CAN Lo) via the supplied loom with automotive-grade heat-seal crimps
• Up to 4 programmable outputs (High Beam, Position Light, Reverse, Ignition, etc.)
• Fused battery positive and ground connections included
• Bluetooth OTA updates via the CANNY app (Android/iOS)
• Use with a vehicle-side wiring harness kit (sold separately)