Pismo Sprinter Bumper

These are IN STOCK. Buy today, ships in less than a week.

The new Owl Pismo bumper is a beautiful evolution of the Sprinter bumper. Compact, clean, and sleek while retaining an aggressive but factory look.

Manufactured of rugged steel, this bumper allows the mounting of a 12,000 lbs winch and adds dual recovery points and a hitch mount. 

Designed in partnership with one of the industry's largest bumper manufacturers means you can rest assured the quality and longevity are up to the toughest challenges. This bumper is bulletproof and you know Owl has put it to the test (breaking gear is our pastime!)

Can we also talk about how good it looks? Blending effortlessly into the lines of the Sprinter while adding just the right amount of toughness with a 1.875" bull bar. The Pismo protrudes only a few inches from the factory plastic bumper which gives it a more subtle look. 

Sensors:

The Pismo relocates both the radar sensor and the parking sensors and both should function like factory. Importantly, the radar sensor is mounted within, not above, the bumper as it is on other bumpers. The lower mounting keeps the sensor much closer to the factory height to ensure proper function. 

Recovery: 

For those wanting to take their van off the beaten path, it is critical you have solid recovery points and a winch. As they say, prepare to self-rescue. Whether it is pulling yourself out of a sticky situation, or helping a stranded vehicle, once you have a winch, you won't know how you managed without one. 

• Fits Sprinter 2500 4x4 VS30 vans 2019-Present. 2023 AWD (a few AWD vans will require the brackets below for the 3500 models) 
• 3500

• VS30 and 2wd models (2019-Present) - require additional brackets, see below for details

• Ultra-Rugged Steel Design

• Round tube bull bar 1.875"

• Includes Additional Front Hitch 2"

• Dual Tow Shackle Mounts (shackles not included) 1"

• Winch-ready (winch sold separately) Warn VR-EVO 12k, Warn Zeon 12k and Superwinch 12k

• Works with all front parking sensors (including adaptive cruise controls)

• Front hitch weight rating 300lbs 

• Clears front camera (you can see the edge of the bar in the front camera)

• Shipping is via freight. Shipping is flatrate $199

• *Winch, Shackles, fairleads shown in photos are sold separately

• *Vans with factory rear AC may have to make modifications to make the Pismo fit. (this is mainly for vans that started life as a passenger van and have a separate rear AC)

3500 & 2wd models (and some AWD models) - These model vans are missing two factory brackets, bolts, and welded-in nuts that are present on 4x4 models. To make the bumper safe these factory brackets must be professionally installed. Therefore these models require professional installation at either an Owl Offroad location or Owl dealer. Installation cost for these models at an Owl Offroad is $1200

Installation at Owl Offroad is an additional: $900 (includes winch installation and wiring). 3500 and 2wd is $1200

Lead Time: In stock

Install Video:

**Important - Bumper release of liability

Installation of an aftermarket bumper requires relocating the factory radar sensor which is used as part of the safety system on the vehicle. OWL does not complete any safety testing on the effect of relocating this equipment and cannot predict how this will affect the functioning of the vehicle’s safety system.

Additionally, a bumper can play an important role in the crashworthiness of the vehicle involved in a collision. OWL does not complete any safety testing on the effect of a new bumper on the crashworthiness of a vehicle involved in a collision.

The original designer and manufacturer have assured Owl of the bumper that it is safe, and after recalibration, the system SHOULD function as intended. Owl CANNOT independently verify this claim. All functional and safety claims are solely those of the designer and manufacturer Backwoods Adventure Mods.

The buyer assumes all liability for making these changes to their vehicle. It is the responsibility of the purchaser to inform all occupants of the vehicle of the changes made to the safety system. The purchaser also assumes all liability for any other vehicles or occupants involved in a collision or incident with the modified vehicle.

Purchaser agrees to indemnify Owl against any claim in the event the safety systems are adversely affected or do not function as intended. It is the responsibility of the purchaser to comply with all local and national laws regarding making changes to the safety equipment of the vehicle

Purchaser understands that any modifications to the safety equipment of the van are done at the buyer’s own risk. All liability for the functioning of the system falls on the purchaser and the original equipment manufacturer Backwoods Adventure Mods.

By replying to this email you are agreeing to a digital signature on the above. You are stating that you understand the risks and responsibilities and are agreeing to the above statement. If you do not agree with any of the statements or are unwilling to comply with the statements above, do not purchase this product.