The Van Wife Components Multifunction Bed System is a versatile furniture system for your van that can create numerous configurations, including a platform bed, two bunks, couch, desk, or table. The entire system can be hung on the wall vertically (2 per side) to open the entire back of the van.
The system works by integrating adjustable panels that hang from themselves and from our J channel. Each panel has a thumb screw to be able to hold the panel in place while in use by fitting into the predrilled J channel holes.
Our predrilled J channel has holes spaced to be able to set the locking bolts in place and prevent sliding, as well as to create a stable back rest in couch mode.
Each panel is 18" deep and adjusts from 60"-72" wide. J channel is 75" long. For installation, please ensure that your walls are within these dimensions and are as parallel as possible to one another. J channel needs to be supported adequately either through attachment to framing members or other bracing systems. We offer a 66" and 75" tubing solution to span a Flare or shim out a wall. Each panel can support up to 400 pounds of weight when installed properly.
While there are countless configurations, we typically recommend 4 panels and 3 sets of J channel to create 3 mounting heights. This allows for the most configurations, including platform bed, bunks, table, couch, and desk configurations. Even in shorter vans, such as a Sprinter 144, the 4th panel will be used for bunks and as a storage shelf.
3 panels creates a 54" platform and 4 panels creates a 72" platform.
This system is not a seating solution for while the van is in motion and we do not recommend adding seatbelts or using this system while driving. Please secure all panels before driving and do not drive with any of our leg systems in place. Panels must be strapped in place if hung vertically while in motion.
TRAIL TESTED GEAR
Owl offers a highly curated selection based on what we use. Our gear is trusted by the world's top van builders.
WE'RE HERE FOR YOU
Call us at 866-695-8267 if you have questions. No call centers - our install experts talk with you.
MADE IN THE USA
Owl products are engineered for off-road, and hand welded in Arizona. No one beats our quality. Period.
Canceled Orders
We want all customers to be happy with their purchases but in the event of a canceled order, we cannot recoup the fees charged to us by the credit card companies. When an order is placed, the credit card company takes a percentage of the sale, typically 5%-6% This is money that DOES NOT go to us and we do not get this charge given back to us when we refund an order. Therefore, if someone buys a suspension and then cancels, we pay the credit card company several hundreds of dollars that we cannot get back. Although you may not have noticed, it is industry standard for larger dollar items to have a "restocking fee" of 15% or more. We do our best to charge exactly what we get charged by the credit card company when you cancel an order. In the event of a canceled order, the 5%-6% that the credit card company charges us cannot be refunded. Please make note of this before you order.
• All canceled orders over $1000 paid with a "Credit Card" will have a 5% credit card processing fee that cannot be returned.
• All canceled orders over $1000 paid with a "Shop Pay Installments" will have a 6% credit card processing fee that cannot be returned.
California Prop 65
WARNING: Some of the products listed contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. None of our products are intended to be used in conjunction with clean drinking water unless stated otherwise. For more info please visit www.p65warnings.ca.gov.
